Toshiba Launches Dual H-bridge Motor Driver IC With PWM Control for Mobile Devices and Home Appliances

Based on Toshiba, They Launch Dual H-bridge Motor Driver IC With PWM Control for Mobile Devices and Home Appliances

Toshiba Electronic Devices & Storage Corporation (“Toshiba”) has launched an H-bridge motor driver, “TC78H660FNG,” housed in a TSSOP16 package with a widely used pin-assignment. It is Toshiba’s latest addition to its line-up of drivers for brushed DC motors and stepping motors for applications that include mobile devices and home appliances.

Toshiba’s new-generation DMOS process allows TC78H660FNG to achieve a low ON resistance of 0.48Ω at its maximum rating of 18V/2.0A,[1] and reduces heat generation compared with Toshiba’s current products.

The new driver has a regulator for driving internal circuits, and can drive a motor with a single power supply ranging from 2.5V to 16V. Its wide range of applications include mobile devices powered by a 3.7V lithium-ion battery, 5V USB powered devices, and 12V system devices for home appliances. It also supports a low 1.8V interface.

Features

  • Single power drive, simple PWM control
  • Low ON resistance reduces heat generation compared with Toshiba’s current products. (Ron=0.48Ω (upper + lower: typ.) @VM=12V, Ta = 25°C)
  • Low current consumption (ultra-low standby current: 0.1μA or less @Ta=25°C)

Applications

Battery-powered mobile devices, including robots and toys; home appliances including refrigerators, smart meters, etc.

Main Specifications

Part number

TC78H660FNG

Supply voltage
(operating range)

2.5V to 16V

Output voltage
(absolute maximum rating)

18V @ output ON
20V @ output OFF

Output current
(absolute maximum rating)

2A

Number of H-bridge channels

2ch

Supported motors

Brushed DC motors (dual-motor control is possible)
Bipolar stepping motors

Output on-resistance
(upper + lower)

0.48Ω (typ.)@VM=12V, Ta=25℃

Safety function

Over current detection, thermal shut down, under voltage lockout,

flag output function for over current detection and thermal shut down

Features

Current consumption in standby mode: 0.1μA or less

Single power drive

Support for a 1.8V I/F

Direct PWM control

or

constant current control without current sense resistor

Package

TSSOP16 (size: 5.0mm×6.4mm)

Stock Check & Purchase

Buy Online

[1] Actual motor drive current depends on the use environment and such factors as ambient temperature and power supply voltage.

For more information about the new product, visit:
https://toshiba.semicon-storage.com/info/lookup.jsp?pid=TC78H660FNG

For more information about Toshiba’s motor driver IC line-up, visit:
https://toshiba.semicon-storage.com/ap-en/semiconductor/product/motor-driver-ics.html

To check the availability of the new product at online distributors, visit:
https://toshiba.semicon-storage.com/ap-en/semiconductor/where-to-buy/stockcheck.TC78H660FNG.html

SOURCE Toshiba